Top 50 Popular Supplier
11/01/2555 16:51 น. ,
อ่าน 5,833 ครั้ง
BRUNEIL SHELL รับสมัครวิศวกรและช่างเทคนิคหลายร้อยตำแหน่ง
11/01/2555 16:51 น. |
(1) Project / Contract Managers (PM) The PM shall be fluent in the English Language, have an engineering background with at least 15 years experience in project management and Oil and Gas construction activities (mechanical/ civil) and have a recognized qualification, degree or similar. He shall be responsible for the administration of all aspects of the CONTRACT, including, but not limited to: (i) Project Management (ii) Engineering and construction aspects. (iii) Installation (iv) Commercial aspects (v) Resolution of disputes (vi) Performance, including inter alia workmanship, productivity (vii) Safety. (viii) Manpower selection, qualifications and management. (ix) WORK planning. (X) Maintenance of CONTRACT documentation, drawings and records. (xi) All quality matters Please submit c.v.(including your telephone,fax and email contact), academic certificates, testimonial of working experiences, photo, copy of passport to me at E-mail : thunwakl@hotmail.com Or by post mail at : Thunwa L. P.O.Box 308, Post Sengkurong, BRUNEI BG 1121 Contact Number +673-8711423 - Brunei |
ความคิดเห็นทั้งหมด 9 รายการ |
ความคิดเห็นที่ 1
|
11/01/2555 16:52 น. |
(2) Mechanical Field Engineers The Mechanical Engineer shall have an engineering background with at least 10 years experience in project management and onshore construction and have a recognized qualification, degree or similar. The Mechanical Field Engineer will:- (i) be skilled in the fabrication and erection of pipework, the general maintenance and repair of process and power plant. The setting up and levelling of equipment and the aligning of rotating equipment; (ii) be capable of interpreting engineering drawings and have a good knowledge of industrial quality and safety standards; (iii) be fluent in the English language (both spoken and written); (iv) be capable of supervising the artisans and performing any administrative work. Such activities may include but will not be limited to obtaining and renewing work permits,(e.g. Clearance Certificates, Fire Permits etc.), submitting daily time sheets, input required data for the COMPANY computerised engineering administration systems; (v) have received an engineering apprenticeship or training in Mechanical Engineering and have had approximately six (6) years further suitable experience with a minimum of two (2) years satisfactory supervisory experience; (vii) be capable of organising the WORKS to be carried out and co-ordinating with contractors Project Co-ordinator and COMPANY REPRESENTATIVE on all aspects of the WORKS. (3) Civil Field Engineers The Civil Field Engineer shall be qualified to a minimum HND level in Civil Engineering with a 10 year experience in supervision in the field of major construction and maintenance of oil and gas producing facilities. Particular experience shall include: (i) Detailed planning for construction activities. (ii) Preparation of construction packages detailing workscope and installation procedures. (iii) Preparation of site sketches/drawings for issue to construction crews to aid design drawings. (iv) Supervision of construction crews/teams in the execution of work. (v) Application of safety philosophies in the construction environment e.g. Safety briefings / meetings, "Tool Box Talks", Unsafe Act audits etc. (vi) Materials control (vii) Pre commissioning activities. (viii) Preparation of Job Activities |
ความคิดเห็นที่ 2
|
11/01/2555 16:54 น. |
(4) Planners The Planner shall have hold an appropriate Technical qualification and have a minimum of five years demonstrable experience of turn around planning on medium sized “brown field” projects in the oil and gas industry. Shutdown experience may be either offshore or onshore and cover at least two projects with strong mechanical/piping elements. He/she shall be highly experienced in: (i) Primavera or Microsoft Project (or equivalent) planning software (latest version) (ii) Critical Path Analysis planning techniques and the preparation of “Gantt Charts”. (iii) Methods of reporting/presenting planning, progress and forecast data etc. (iv) Trend analysis and forecasting techniques. Responsibilities will include: (i) Monitoring work progress on a daily basis and producing weekly and monthly forecast. (ii) Contribute significantly to the preparation of level 3 “workpacks” or “job cards” in compliance with the contract requirements. (iii) Assess and determine actual physical progress. (iv) Develop recovery plan as and when required. (5) Materials/Procurement Coordinators The Materials Coordinator shall have proven experience of at least ten (10) years to develop and manage the Site materials management system. He/she shall have much experience working on a construction site and preferably in a shutdown context. He/she shall be familiar with: (i) familiar with the Shell MESC coding systems (ii) materials storage and control (iii materials delivery and receipt (iv) materials requisition and tracking at item level (v) expediting (vi) materials reconciliation (6) Quantity Surveyors A quantity surveyor shall :- (i) hold a recognised degree/diploma or equivalent professional Quantity Surveying qualification. (ii) have a minimum of three (3) years practical experience in Quantity Surveying within the Oil and Gas industry. (iii) be fluent in both spoken and written English. (7) HSSE Officers HSE Officer will:- (i) have at least 5 years of experience in oil and gas industry as an HSSE Officer with recognized HSE training certificates. He will have an excellent knowledge of all aspects related to Health, Safety and Environment. (ii) fluent in English and fully conversant with the COMPANY HSE Standards and Specifications |
ความคิดเห็นที่ 3
|
11/01/2555 16:55 น. |
(8) QA/QC Coordinator/ Inspectors He/she shall be able to demonstrate to have sufficient knowledge and experience of petro-chemical projects. Has a minimum of 10 years experience in quality assurance and control role including supervision of QA/QC activities, with a solid Engineering background and CSWIP 3.2 or equivalent qualification. Shall also hold a recognised approved qualification in Quality, such as ISO 9000 lead assessor and certified to interpret RT film. Will have detailed knowledge of NDT techniques and welding and is a certified third party lead auditor. A co-ordinator(s) will likely hold a HND or equivalent qualifications with minimum of Ten (10) years experience. Responsibilities will include (but not limited to); (i) development and implementation of the quality plan (ii) demonstration of quality control of all “tools” that can affect quality, ref. Torque wrenches, Pressure Gauges, Callipers, etc. (iii) to be able to identify, develop and implement corrective actions. (iv) to approve and comment on welding procedures, and to generate welding instructors. (v) to ensure smooth safe delivery of the Quality Plan. (9) Scaffold Superintendants He/she shall have the full range of skills and certificates applicable to their trade in oil refinery, gas, power or petro-chemical plant; being skilled in the erection and inspection of scaffolds as are required to assist the overhaul of vessels, columns, heat exchangers, spading, opening, closing, as well as small project activities, etc. Holds Certificate of Competency Scaffold, Safety Inspection, and/or National Vocational Qualifications or equivalent and has a minimum of 10 years experience in the scaffolding industry and he/she must be fluent in both spoken and written English. The Scaffold Superintendant shall also be responsible to design and make calculation for the erection of scaffolds as are required to assist the overhaul of vessels, columns, heat exchangers, spading, opening, closing, as well as small project activities, etc |
ความคิดเห็นที่ 4
|
11/01/2555 16:56 น. |
(10) Senior Supervisors The Senior Supervisor shall possess approximately ten (10) years experience with a minimum of five (5) years satisfactory supervisory experience and received an engineering apprenticeship or training in Mechanical Engineering. Responsibilities shall include: (i) be skilled in the fabrication and erection of pipework, the general maintenance of process and power plant. The setting up and levelling of equipment and the aligning of rotating equipment; (ii) be capable of interpreting engineering drawings and have knowledge of industrial safety; (iii) be fluent in the English language (both spoken and written); (iv) be capable of supervising the artisans and performing any administrative work. Such activities may include but will not be limited to obtaining and renewing work permits,(e.g. Clearance Certificates, Fire Permits etc.), submitting daily time sheets, input required data for the COMPANY computerised engineering administration systems; . (11) Welding inspectors The Inspector for welding shall be qualified as follows:- Qualifications Experience Background Requirement 1. CSWIP - Senior Inspector 3.2 or AWS - Certified Welding Inspector and CSWIP or PCN LII or ASNT LII in Radiographic Interpretation (Ferritic Steel) or CWB LII - Canadian Welding Bureau (AWS Equivalent ) and CSWIP or PCN LII or ASNT LII in Radiographic Interpretation (Ferric Steel or Equivalent). 10 years in Oil and Gas or related Industry with 5 years of which as Welding Inspector. Knowledge in Inspection Methods/Techniques. QA/QC Principles and Standards. Knowledge in Quality Management System ISO 9000. (l2) Blast/Paint or Coating Inspectors The Inspector shall be certified with NACE level 2 (National Association of Corrosion Engineers) or ERS Senior Paint Inspector Level II or equivalent as a minimum and shall have at least five (5) years experience in painting/coating inspection and in general five (5) years experience in coating application work which includes knowledge of surface preparations, paintings, protective coatings and wrapping. The inspector is responsible for quality control and as such he shall have no direct responsibilities for production although he will work closely with the production team. The Coating inspector shall be responsible for all protective coating HSE aspects. He will be allowed to act as Safety Officer only for the protective coating application team.He shall co-ordinate with the COMPANY's Health Safety and Environment (HSE) Division on all protective coating safety matters. He shall be able to communicate and write fluently in English. |
ความคิดเห็นที่ 5
|
11/01/2555 16:57 น. |
(13) Supervisors The Supervisor will:- (a) be skilled in the fabrication and erection of pipework, the general maintenance of process and power plant. The setting up and levelling of equipment and the aligning of rotating equipment; (b) be capable of interpreting engineering drawings and have knowledge of industrial safety; (c) be fluent in the English language (both spoken and written); (d) be capable of supervising the artisans and performing any administrative work. Such activities may include but will not be limited to obtaining and renewing work permits,(e.g. Clearance Certificates, Fire Permits etc.), submitting daily time sheets, input required data for the COMPANY computerised engineering administration systems; (14) Scaffold Supervisors (a) Scaffolding supervisors shall have not less than ten (10) years relevant experience in the scaffolding industry. He shall hold an advanced C.I.T.B or E.I.T.B. Certificate of training. (b) He shall be responsible to the CONTRACT MANAGER for supervision, co-ordination, and carrying out of scaffolding in connection with the WORK and shall be responsible for the workmanship, productivity, conduct and safety of the personnel. The Scaffolding supervisor shall be responsible for all aspects of design, erection and in-service maintenance and inspection of the scaffolding. (15) Electrical Field Engineers The Electrical Field Engineer shall posses a BSc (or equivalent) in Electrical Engineering and shall have eight (8) to ten (10) years experience in design/construction/commissioning/ maintenance of H.V and L.V distribution systems including protection systems and explosion proof equipment. He must be able to speak, read and write good English (College level) (16) Instrumentation Field Engineers The Instrumentation field engineer shall possess an HND or equivalent and shall have eight (8) to ten (10) years experience in new construction and commissioning of Instrumentation works. He must be able to speak, read and write good English (College level) (17) Electrical Supervisors: The supervisor shall possess an HND or equivalent and shall have eight (8) to ten (10) years experience in new construction and commissioning H.V/L.V distribution systems including protection systems and explosion proof equipment. He must be able to speak, read and write good English (College level) (18) Electrical Technicians: Each technicians shall have passed the C and G 803 parts I and II or equivalent and shall have five (5) to seven (7) years experience in wiring of H.V/L.V control systems, installation of protection relays and CT‟s and explosion proof equipment. He must at least speak, read and write reasonably good English (upper secondary school level) |
ความคิดเห็นที่ 6
|
11/01/2555 16:59 น. |
(19) Skilled Electricians: Skilled Electricians shall have completed trade apprenticeship or trade school training to C and G 823 or equivalent level. They must be skilled and experienced in the use of all electricians‟ hand tools and in the use of measuring and testing equipment. They must have at least 5 years on the job experience of which two (2) years shall preferably in the oil and gas industry. . He must at least speak, read and write reasonably good English (lower secondary school level) (20) Stationary Equipment Technicians Stationary Equipment Technician will :- (a) be skilled on the opening up, closing, removal and installation of stationary equipment such as vessel, columns, heat exchangers, filters, non-return valve, valves, sight glasses, safety/relief valves, control valves including repacking and lapping of various valves; (b) be familiar with spading and de-spading of pipeline system and have basic knowledge of hydraulic system; (c) be familiar with piping work such as flange sizes, stud-bolts, pressure setting and gasket materials; (d) be capable of using tools such as torque wrenches and hydraulic bolt tensioning equipment; (e) be fluent in spoken and written English. (f) have industrial working experience in the process industry on similar work for at least four years; (g) have BTEC or City and Guild Certificate in Mechanical Engineering (desirable but not essential). (h) A minimum of 3 personnel are required to be certified in the use of Breathing Apparatus (BA) (21) Control Valve Technicians Control Valve Technician will:- (a) have experience - at least ten (10) years, in the overhaul, setting and testing of all types of control valves, including but not limited to FISHER, MASONEILAN AND BETTIS control valves and actuators. He must have relevant experience and ability in the testing procedures, stroke adjustment and repair; (b) have BTEC or City and Guild Certificate in Mechanical Engineering (desirable but not (c) have industrial work experience on relevant types of control valves in overhaul and testing for a minimum of 4 years; (d) be fluent in spoken and written English; (e) preferably be capable of working with spare parts and maintenance history system; (f) be capable of motivating and directing small teams of 2-4 fitter mechanics; |
ความคิดเห็นที่ 7
|
11/01/2555 17:00 น. |
(23) Rotating Equipment Technicians Rotating Equipment Technician will :- (a) have obtained National Certificate (BTEC) or equivalent City and Guilds Certificate in Mechanical Engineering Practices; (b) be capable of overhauling rotating equipment such as centrifugal and reciprocating pumps, steam turbines, gear boxes and reciprocating compressors (including their piping system and structural support); (c) be able to interpret drawings and manuals and have a good understanding of the functioning of each part of the equipment. (d) be able to diagnose and correct intricate problems in turbine/compressor lube-, control- and sealoil systems and other hydraulic systems. (e) be capable of selecting and using the correct tools, alignment equipment and materials; (f) have good knowledge of industrial safety procedures; (g) have a minimum of six (6) years practical experience in overhauling rotating equipment; (h) be able to communicate in spoken and written English. (24) Riggers Riggers will :- (a) have the full range of skills applicable to their trade in the Oil and Gas Industry including, but not limited to being skilled in the sizing and fixing of slings, chain blocks etc., giving clear control instructions to crane operators and in the erection of steelwork (b) have a minimum of four (4) years suitable practical experience in oil refinery, gas, power or petro-chemical plant (c) have a working knowledge of the applicable standards and the use and handling of: • wire ropes/slings to BS1290, BS3317 and BS3481 • pulley blocks to BS3243 • shackles to BS3032 • chain hoists to BS4898 (25) Mechanical Fitters Mechanical Fitters will :- (a) have the full range of skills applicable to their trade in the Oil and Gas Industry including, but not limited to, being skilled in the repair and maintenance of refinery process and power plant, pumps, compressors, steam turbines, fans, hydraulic equipment and system etc., in the overhaul of valves (including safety relief and control valves) and of other mechanical equipment e.g. exchangers, columns, vessels and tanks, and in the alignment of running equipment; (b) have a minimum of five (5) years suitable practical experience in oil refinery, gas, power or petro-chemical plant; (c) have a working knowledge of the English language. (26) Machinists Machinists will :- (a) be able to work from drawings to produce parts, or make repairs to stationary and rotating equipment to a high level of accuracy and quality; (b) be able to set up and operate any machine tool, including lathes, boring, milling, lapping, grinding, shaping and balancing machines; (c) have a minimum of ten (10) years experience as a Machinist; (d) have a sound knowledge and a familiarity with engineering drawings and sketches, as well as being fully conversant in English. |
ความคิดเห็นที่ 8
|
11/01/2555 17:04 น. |
Please submit c.v.(including your telephone,fax and email contact), academic certificates, testimonial of working experiences, photo, copy of passport to me at E-mail : thunwakl@hotmail.com Or by post mail at : Thunwa L. P.O.Box 308, Post Sengkurong, BRUNEI BG 1121 Contact Number +673-8711423 - Brunei |
ความคิดเห็นที่ 9
|
06/03/2555 14:22 น. |
จบเลย ภาษาอังกฤษอนุบาล3 อด 5555555+ |
ความคิดเห็นทั้งหมด 9 รายการ |